FAQS

Laser treatment is generally considered safe when performed by a trained professional. However, like any medical procedure, it has potential side effects, which may include:
•    Redness and swelling in the treated area
•    Temporary changes in skin color
•    Slight pain or discomfort during and after the procedure
Most side effects are temporary and resolve within a few days to a couple of weeks. It is crucial to have the treatment done by a certified dermatologist or a trained aesthetician to minimize risks.

The Q-switched Nd: YAG laser represents a significant advancement in acne treatment, offering an effective and non-invasive solution for those struggling with persistent breakouts. By targeting the root causes of acne, this laser technology helps patients achieve clearer, healthier skin and regain their confidence. Always consult with a qualified dermatologist to determine if this treatment is suitable for your skin type and acne condition.

After laser treatment for acne, proper care is essential to ensure optimal results and to minimize side effects. Here are some guidelines for post-treatment care:
1.    Avoid Sun Exposure: The skin will be more sensitive to sunlight after the procedure. Use a broad-spectrum sunscreen with at least SPF 30 to protect your skin.
2.    Keep the Skin Clean and Moisturized: Gently cleanse your skin with a mild cleanser and keep it moisturized. Avoid using harsh or abrasive skincare products.
3.    Avoid Picking or Scratching: Do not pick or scratch the treated areas to prevent infection and scarring.
4.    Follow Doctor’s Instructions: Adhere to any specific post-treatment instructions provided by your dermatologist, including the use of prescribed topical medications.
5.    Stay Hydrated: Drink plenty of water to help your skin heal and maintain its health.

The exact treatment needed will depend on the severity of the patient’s acne condition. The typical skin treatment course should be about 4-6 sessions, each session a few weeks apart. Sessions can last anywhere from 15-20 minutes or up to an hour; this depends on how much skin needs to be treated.
Each treatment begins with a protective cooling gel being applied to the targeted area. This will help keep the top layer of the skin safe from the heat without preventing the IPL flashes from penetrating the skin.
Afterwards, the IPL device is pressed to the treated area and a flash of light is emitted into the skin. The doctor should then move the tip along the skin, emitting a flash at every different point. This process can be repeated with each filter if desired by the doctor or technician.
The treatment ends with the skin being wiped clean and the patient given a post-treatment product to help with the healing process.

If you have acne and you are looking for the best solution to get rid of it, then IPL photofacial is the solution you need. More and more doctors are recommending IPL photofacials for patients with severe acne or acne scarring, as well as other conditions like sun spots and age spots (through targeting blood vessels), and fine lines.
With just a few sessions, IPL treatments can clear up even the most extreme cases of facial acne and/or acne scarring. With alternatives like oral antibiotics that can be harmful to some patients, IPL therapy is a safe and easy option for acne removal.
When dealing with acne, IPL photofacials treatments generally utilize three filters or wavelengths: 420 nm or blue light, 560 nm of yellow light, and 590 nm of red light. These three filters provide their own properties:
- 420 nm (blue light): Destroying certain acne bacteria
- 560 nm (yellow light): Tending swollen acne lesions
- m590 nm (red light): Paralyzing overactive oil glands in the skin

Multiple sessions are required for effective hair removal, typically ranging from 6 to 8 treatments. The exact number of sessions depends on factors like hair thickness, color, and the area being treated.

Hair Removal: Diode lasers are widely used for permanent hair reduction as they effectively target the melanin in hair follicles.
Skin Rejuvenation: They can treat skin conditions such as pigmentation, acne scars, and wrinkles.
Medical Procedures: Diode lasers are used in surgeries for cutting and coagulating tissue.
Industrial Uses: They’re also applied in welding, cutting, and engraving materials like metals and plastics.

The discomfort level varies from person to person. Many describe the sensation as a mild pinprick or the snapping of a rubber band against the skin. Cooling systems integrated into the machine often help minimize discomfort during the procedure.

Yes, diode laser treatment is generally safe when performed by a trained professional. The technology is designed to minimize risks, and most side effects, such as redness or swelling, are temporary. It’s important to follow pre- and post-treatment care instructions to ensure the best results.

During the treatment, a laser technician will apply a cooling gel to the area and then pass the laser handpiece over your skin. The laser emits pulses of light that target the hair follicles or skin cells. The treatment time varies depending on the area but typically lasts between 15 minutes to an hour.

Modern diode lasers are designed to treat a wide range of skin types safely. However, effectiveness and safety can vary based on skin tone, hair color, and other factors, so it’s important to consult with a provider who can assess your individual case.

Ideal candidates typically have lighter skin and darker hair for hair removal treatments. However, advancements in diode laser technology have made it effective for a broader range of skin and hair types. It’s best to consult with a professional to determine if you’re a suitable candidate.

Common side effects include redness, swelling, and slight discomfort in the treated area, which usually subside within a few hours to a couple of days. Rarely, there may be more severe side effects, like burns or pigmentation changes, but these are uncommon when the procedure is done correctly.

Avoid Sun Exposure: Stay out of the sun for at least two weeks before your treatment.
Do Not Wax or Pluck: Shaving is recommended, but avoid waxing or plucking the area to be treated.
Follow Specific Instructions: Your provider will give you detailed instructions on how to prepare, such as avoiding certain skincare products before your appointment.
11. What is the downtime after a diode laser procedure?
There’s little to no downtime after a diode laser procedure. Most people return to their normal activities immediately, though you may need to avoid direct sun exposure and follow specific aftercare instructions.

A diode laser machine is a type of laser that uses diodes as the light source to generate laser beams. These machines are commonly used in various medical, cosmetic, and industrial applications due to their precision and efficiency.

A diode laser works by emitting a concentrated beam of light through a semiconductor diode. This light is absorbed by the target material (such as hair follicles in hair removal treatments), causing it to heat up and achieve the desired effect, whether it’s cutting, heating, or destroying targeted cells.

Intense Pulsed Light (IPL) targets pigmented cells in the skin by emitting broad-spectrum light. The light is absorbed by melanin, heating and breaking down the pigment. The body then naturally eliminates the fragmented pigment, leading to a more even skin tone.

Side effects are usually mild and temporary, including redness, swelling, and darkening of treated spots. In rare cases, blistering or changes in skin texture may occur.

There is minimal to no downtime with IPL treatment. Most patients can resume normal activities immediately, though it is recommended to avoid intense sun exposure and strenuous exercise for a few days.

Choose a licensed and experienced professional who specializes in IPL treatments. A thorough consultation should be conducted to assess your skin type, condition, and suitability for the treatment.

The number of sessions varies depending on the severity of the pigmentation and individual skin response. Typically, 3-6 sessions spaced 4 weeks apart are recommended for optimal results.

Yes, IPL is also effective for hair removal, treating vascular lesions, reducing redness, and improving skin texture by stimulating collagen production.

Aftercare includes avoiding sun exposure, applying broad-spectrum sunscreen, and keeping the skin moisturized. Following these guidelines helps in maintaining and enhancing the results.

Pigmentation refers to the coloring of the skin, which is determined by melanin. Variations in melanin production can lead to conditions such as hyperpigmentation (darker spots) and hypopigmentation (lighter spots).

IPL can treat various types of pigmentation issues including sun spots, age spots, melasma, and other forms of hyperpigmentation.

IPL treatment is generally safe for most skin types, but it is most effective on lighter skin tones. A consultation with a skin care professional is necessary to determine suitability.

During the session, a cooling gel is applied to the treatment area. The IPL device is then moved across the skin, emitting light pulses. Patients may feel a slight warming or tingling sensation.

Yes, IPL can be combined with other treatments like chemical peels, microdermabrasion, or topical treatments to enhance results. Consult with a skin care professional to develop a comprehensive treatment plan.

Post-treatment, some redness and swelling similar to a mild sunburn can occur. Treated pigmented spots may darken before they flake off or fade away.

Results can be long-lasting, especially with proper sun protection and skin care. However, maintenance sessions may be required to keep pigmentation at bay.

Pigmentation issues can be caused by various factors including sun exposure, hormonal changes, aging, inflammation, and certain medications or medical conditions.

Yes, our products have CE ISO 13485 certificates.

Yes. We have established a minimum one-year flexible warranty for each product and customer needs.

We provide guidance videos and user manuals for your reference. In addition, you can also apply for free clinical operation guidance and 24-hour online services from us.

According to quantity and production schedule, small quantities are usually 7-15 days, and large orders are generally 25-30 days. According to the customer's needs, land, ship, and air transportation are all available.

We have over 20 years of experience manufacturing medical aesthetic equipment and rich industry information. While ensuring high quality and cost-effectiveness, we design more high-end and beautiful equipment for you. We take "only making art" as our driving force for continuous progress, and it is our honor to provide customers with more humane and meticulous services and care.

We accept Western Union, Money Gram, T/T, and TradeAssurance.

Yes, OEM packing and printing logos are available.

You will receive all supporting equipment selected during the instrument order and communication phase, as well as free technical support and software upgrades during the warranty period.

Aftercare typically includes avoiding sun exposure, applying broad-spectrum sunscreen, and keeping the skin moisturized. Specific aftercare instructions will be provided based on the treatment received.

Anyone looking to improve the appearance of their skin can be a good candidate for skin rejuvenation. Ideal candidates are those with fine lines, wrinkles, sun damage, uneven skin tone, acne scars, or other skin imperfections.

Skin rejuvenation refers to a variety of treatments designed to restore a youthful appearance to the skin by addressing signs of aging, damage, and other skin imperfections. These treatments aim to improve skin texture, tone, and overall health.

Most skin rejuvenation treatments cause minimal discomfort. Patients might experience a mild warming or tingling sensation during IPL treatments. Diode and Q-switched lasers may cause slight discomfort, but it is generally well-tolerated. Topical numbing creams can be applied to enhance comfort.

Downtime varies depending on the treatment. IPL and Q-switched laser treatments usually have minimal downtime, with some redness or swelling that subsides within a few hours to a day. Diode laser treatments may have slightly more downtime, depending on the intensity of the treatment.

Side effects are usually mild and temporary, including redness, swelling, and darkening of treated spots. In rare cases, blistering or changes in skin texture may occur. It's essential to have treatments performed by a licensed and experienced professional to minimize risks.

•  

  IPL Laser (Intense Pulsed Light) uses broad-spectrum light to target and treat various skin issues. The light penetrates the skin and is absorbed by pigmented cells and blood vessels, which are then broken down and eliminated by the body.

  Benefits:

  Effective for reducing sunspots, age spots, and freckles.
  Can treat vascular lesions such as broken capillaries and rosacea.
  Stimulates collagen production, improving skin texture and reducing fine lines.
  Minimal downtime and discomfort.

   

  Diode Laser emit a concentrated beam of light that penetrates deep into the skin, targeting the deeper layers where collagen and elastin are produced. This promotes the regeneration of these vital proteins.

  Benefits:

  Deep penetration leads to significant collagen stimulation.
  Effective for treating wrinkles, fine lines, and acne scars.
  Can also be used for hair removal and treating vascular lesions.
  Provides long-lasting results with a series of treatments.

   

•  

• Q-Switched Laser deliver short, high-energy pulses of light that target and break down pigmented cells and tattoo ink particles. The fragments are then naturally removed by the body’s immune system.

  Benefits:

  Highly effective for treating pigmented lesions such as melasma, sunspots, and freckles.
  Can remove tattoos and other deep-seated pigmentation.
  Minimal damage to surrounding tissue, making it safe for various skin types.
  Short treatment sessions with minimal downtime.

   

  Other skin rejuvenation treatments include: Chemical Peels / Microdermabrasion / Microneedling /Laser Resurfacing

Results can be long-lasting, especially with proper skin care and sun protection. Maintenance sessions may be recommended to prolong the benefits.

Yes, skin rejuvenation treatments can be combined for enhanced results. For example, IPL can be combined with chemical peels or microdermabrasion to address multiple skin concerns. Consult with a skin care professional to develop a comprehensive treatment plan tailored to your needs.

Preparation varies by treatment, but general guidelines include avoiding sun exposure, discontinuing the use of photosensitive medications or products, and following any specific instructions provided by your skin care professional.

Skin rejuvenation offers several benefits, including improved skin texture, even skin tone, reduced fine lines and wrinkles, enhanced elasticity, reduced acne scars, and a brighter complexion.

Improved Skin Texture: Treatments can smooth out rough or uneven skin, resulting in a softer and more refined texture.

1. Even Skin Tone: Rejuvenation techniques help reduce hyperpigmentation, sunspots, and redness, leading to a more uniform complexion.
2. Reduced Fine Lines and Wrinkles: By stimulating collagen production, skin rejuvenation treatments can minimize the appearance of fine lines and wrinkles.
3. Enhanced Elasticity: Increased collagen and elastin production restores the skin's firmness and elasticity, giving it a more youthful appearance.
4. Acne Scar Reduction: Certain rejuvenation treatments can diminish the appearance of acne scars and other blemishes.
5. Brighter Skin: Overall skin brightness is enhanced as the treatments promote cell turnover and remove dead skin cells.

The number of sessions required varies depending on the treatment type and the individual's skin condition. Typically, a series of 3-6 sessions spaced a few weeks apart is recommended for optimal results.

Choosing the right treatment depends on your skin type, concerns, and desired outcomes. A consultation with a licensed and experienced skin care professional can help determine the most suitable treatment plan for you.

• Effective on Various Ink Colors: The laser can target a wide range of ink colors, including black, blue, green, and red, which are often challenging to remove with other methods.
• Minimal Risk of Scarring: The precise targeting minimizes damage to surrounding skin, reducing the risk of scarring.
• Short Treatment Sessions: Each session typically lasts only a few minutes, making the process convenient.
• Gradual Fading: The tattoo fades gradually over several sessions, providing a more natural and less noticeable transition.

1. Consultation: Discussing the tattoo removal options with a professional to determine the best approach based on the tattoo's size, color, and location.
2. Treatment Plan: Developing a customized treatment plan, often involving multiple sessions.
3. Removal Sessions: Using advanced technologies like Q-switched Nd

lasers to break down the ink particles in the skin.

4. Healing: Allowing time for the skin to heal between sessions and following aftercare instructions to ensure proper recovery.

The number of sessions required varies depending on factors such as the tattoo's size, ink colors, and depth. Typically, multiple sessions spaced several weeks apart are necessary to achieve optimal results.

The Q-switched Nd:yag laser🔗 is a highly effective and widely used technology for tattoo removal. It operates by emitting short, high-intensity pulses of light that penetrate the skin and target the tattoo ink particles.

Mechanism:

• The laser energy is absorbed by the tattoo pigments, causing them to heat up and shatter into smaller fragments.
• The body's immune system then gradually removes these fragmented ink particles over time.

1. Tattoo Removal: One of the most common uses of the Q-switched Nd:yag laser is in tattoo removal. The 1064 nm wavelength is particularly effective for darker ink colors (black, blue, and green), while a frequency-doubled 532 nm wavelength can target red, orange, and yellow inks.

2. Pigmentation Treatments: The laser effectively treats various pigmentation issues such as age spots, sun spots, and melasma by breaking down the melanin pigment in the skin.

3. Skin Rejuvenation: Q-switched Nd:yag  lasers are used for skin rejuvenation procedures like laser toning and carbon peel treatments, which improve skin texture and tone by stimulating collagen production and reducing pore size.

4. Vascular Lesions: These lasers can treat vascular lesions such as spider veins and hemangiomas by targeting and collapsing the blood vessels without affecting the surrounding skin.

The Q-switched Nd:yag laser is a powerful and versatile tool in dermatology and aesthetic medicine. Its ability to deliver high-intensity pulses makes it particularly effective for treating pigmented lesions, tattoos, and vascular conditions, while also offering benefits in skin rejuvenation. Its precision and minimal downtime make it a popular choice among practitioners and patients alike.

• The Q-Switched Nd:YAG laser works by targeting specific pigment in the skin, which TARGETS the damaged skin cells in the treatment area.

  When it comes to laser tattoo removal, the Q-Switched Nd:YAG laser targets ink pigment and breaks it up into smaller particles through powerful bursts of energy. The ink is then absorbed into the bloodstream and eventually expelled from the body.

  The Q-Switched Nd:YAG laser utilizes two energy frequencies; 1064 nanometers, to target deeper skin layers, and 532 nanometers, to address hyperpigmentation and more superficial layers.

• Laser Generation: The Nd:yag crystal is stimulated by an external energy source, such as a flashlamp or another laser, causing it to emit light.

• Q-Switching Mechanism: The Q-switch temporarily stores the energy and then releases it in a single, high-energy burst. This creates a pulse of laser light with very high peak power.

• Targeting Pigments: The laser's energy is absorbed by pigmented structures in the skin, such as tattoo ink, melanin (in the case of pigmentation issues), or hemoglobin (in vascular lesions). The absorption of this energy causes the pigments to break down into smaller particles.

• Natural Healing Process: The body's natural healing processes then remove these fragmented pigment particles over time, resulting in the gradual fading of the tattoo, pigmentation, or vascular lesion.

1. 1. Effective Pigment Removal: It can selectively target and break down pigmented lesions, such as age spots, freckles, and sun spots, without damaging the surrounding skin.

   2. Tattoo Removal: This laser is highly effective in removing tattoo ink of various colors, including stubborn shades like black and blue.

   3. Minimal Skin Damage: The laser's high peak power and short pulse duration allow for precise targeting of pigment, minimizing damage to the surrounding tissue and reducing the risk of scarring.

   4. Versatility: It can be used on various skin types and for different cosmetic procedures, including skin rejuvenation and the treatment of vascular lesions.

   5. Quick Treatment Sessions: The efficiency of the Q-switched ND:YAG laser allows for shorter treatment sessions, making it convenient for both patients and practitioners.

   6. Low Downtime: Patients typically experience minimal downtime, allowing them to resume their normal activities shortly after treatment.

   7. Safe and non-invasive: The procedure is non-invasive and safe when performed by a trained professional, reducing the risk of complications.

   8. Long-lasting Results: The laser provides long-lasting results for pigment and tattoo removal, making it a reliable choice for these treatments.

1. Nd:yag Crystal: The term "Nd:yag" stands for Neodymium-doped Yttrium Aluminum Garnet. This crystal is used as the lasing medium. When energized, the Nd:yag crystal emits light at a specific wavelength, typically 1064 nm, which is in the infrared spectrum.

2. Q-Switching: Q-switching is a technique used to produce a pulsed laser beam with extremely high peak power. By using a Q-switch, the laser can emit light in short, intense bursts, rather than a continuous beam. This results in pulses that are nanoseconds (billionths of a second) long, providing the necessary power to break down pigments without damaging surrounding tissues.

We accept Western Union, Money Gram, T/T.

We offer ONE year warranty for the machine.

We provide instruction video and user manual for your reference, plus 24 hours online service.

 We can provide free technical support and software upgrades.

We can transport the goods by air or by sea, it will be based on customer's requirement.

Yes, we can. We support OEM with certain quantity.

Technology: Q-Switched ND-YAG
Wavelength: 532 nm / 1064 nm
Spot Size: 2–6 (Continuously Adjustable)
Handpiece:  Q-Switched Hand piece + Multipile Teatment Tips

Energy: SPT 532 nm, 200–400 mj

              SPT 1064 nm  50 -1000 mj

              HPT 1064nm  100-1500 mj

Frequency: 1-10Hz/Auto

Screen: 10.1 inch industrial-capacity Capacity Touch screen

Voltage: AC220V, 50/60Hz

Power: < 800w

Cooling System: PID Water Cooling + Air Cooling

Working Temperature: 10–30 °C

Dimension, G.W.:  Machine :  69*47*33cm , 24 kg

                             Trolley: 55.5 * 42* 90.7cm , 20 kg

Common side effects include redness, swelling, and temporary skin irritation. These usually subside within a few hours to a couple of days.

Avoid sun exposure, tanning beds, and waxing for at least 4-6 weeks before treatment. Shave the treatment area 24 hours before your session.

Most people can benefit, but it's particularly effective for those with light skin and dark hair. Newer technologies, like the Ciellulu S500, accommodate various skin types and hair colors.

While it significantly reduces hair growth, multiple sessions are required for optimal results, and maintenance treatments may be needed over time.

Most patients experience minimal discomfort, often described as a rubber band snapping against the skin. Advanced systems like the Ciellulu S500 include cooling mechanisms to enhance comfort.

Yes, it can be performed on almost any part of the body, including the face, legs, arms, underarms, and bikini line.

For more information, visit the Ciellulu S500 product page.

Typically, 6-8 sessions are recommended, spaced 4-6 weeks apart, to achieve the best results.

Laser hair removal uses concentrated light to target the pigment in hair follicles. The light energy is absorbed, damaging the follicle and inhibiting future hair growth.

The number of sessions required depends on the severity of the vascular condition and the individual's skin type. Typically, multiple sessions are needed for optimal results, spaced a few weeks apart. A treatment plan will be customized during the initial consultation.

Side effects are usually minimal and may include temporary redness, swelling, or bruising in the treated area. These effects typically subside within a few hours to a few days. There is little to no downtime, and most patients can resume their normal activities immediately after the treatment.

To prepare for the treatment:

• Avoid sun exposure and tanning beds for at least two weeks before the session.
• Refrain from using retinoids and other skin-irritating products for a few days prior.
• Follow any specific instructions provided by the practitioner during the consultation.

Results from IPL vascular removal can be long-lasting, especially with proper skin care and maintenance. Follow-up treatments may be necessary to maintain the results, as new vascular lesions can develop over time due to factors like aging, genetics, and lifestyle.

Good candidates for vascular removal treatment include individuals with visible blood vessels, such as spider veins or broken capillaries, who are in overall good health. A consultation with a qualified practitioner is necessary to determine suitability based on skin type, condition severity, and medical history.

IPL treatments with the Ciellulu Mulu K2 are generally well-tolerated. Patients may experience a slight warming sensation or mild discomfort during the procedure, but it is usually minimal. Topical numbing creams can be applied if needed to enhance comfort.

Vascular removal treatment is a cosmetic procedure aimed at reducing or eliminating visible blood vessels, such as spider veins, varicose veins, and other vascular irregularities. This treatment can be performed using various methods, including laser therapy, sclerotherapy, and Intense Pulsed Light (IPL) therapy.

The Ciellulu Mulu K2 is an advanced IPL laser device designed for vascular and hair removal treatments. It incorporates Broadband Light (BBL) and Dual Pulse Light (DPL) technologies to deliver effective and precise treatments for various skin conditions, including vascular lesions.

The Ciellulu Mulu K2 can treat a variety of vascular conditions, including:

• Spider veins
• Rosacea
• Broken capillaries
• Facial redness
• Varicose veins (small, superficial ones)

After the treatment:

• - Apply ice packs to the treated area to reduce swelling and discomfort.
• - Avoid hot baths, saunas, and strenuous exercise for a few days.
• - Protect the treated area from sun exposure by using sunscreen and wearing protective clothing.

IPL vascular removal uses broad-spectrum light to target and heat the hemoglobin within the blood vessels. This causes the vessels to collapse and be gradually reabsorbed by the body. The result is a reduction in the appearance of vascular lesions, leading to clearer and more even-toned skin.